4IPNET EAP220 Manuel d'installation rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 4IPNET EAP220. 4IPNET EAP220 18 pages. Enterprise access point
Également pour 4IPNET EAP220 : Manuel de l'utilisateur (20 pages)

Imprimer la page

4IPNET EAP220 Manuel d'installation rapide

Getting Started

4ipnet EAP220 supports web-based configuration. When hardware installation is complete, EAP220 can be

configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0

and above.

The default values of LAN IP address and subnet mask of EAP220 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Steps:

1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP220 via

an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP220 in TCP/IP of your

PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

2. Launch the web browser on your PC by entering the IP address of EAP220 (http://192.168.1.1) at the

address field, and then press Enter.

Example of entering EAP220's default IP Address via a web browser

3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,