- ページ 9

無線アクセスポイント 4IPNET EAP220のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。4IPNET EAP220 18 ページ。 Enterprise access point
4IPNET EAP220 にも：ユーザーマニュアル (20 ページ)

ページを印刷する

Getting Started

4ipnet EAP220 supports web-based configuration. When hardware installation is complete, EAP220 can be

configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0

and above.

The default values of LAN IP address and subnet mask of EAP220 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Steps:

1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP220 via

an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP220 in TCP/IP of your

PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

2. Launch the web browser on your PC by entering the IP address of EAP220 (http://192.168.1.1) at the

address field, and then press Enter.

Example of entering EAP220's default IP Address via a web browser

3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,