Durr EcoGun 615 Manuel d'utilisation et d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Durr EcoGun 615. Durr EcoGun 615 20 pages. Automatic air spraying gun

Imprimer la page

EcoGun 615

MAINTENANCE AND CLEANING

leAnIng And

1. Prevent drying of the applied material in the gun and on the

2. Do not clean the holes in the nozzle system by metal objects.

3. As needed, grease the thread of the sleeve nut of the air jet

mPortAnt

1. Cleanness of whole nozzle system.

2. Properly treated air for spraying (free of water, oil and other

3. Filtered applied material of proper viscosity - follow

4. Follow the recommended pressures for the atomizing air.

If the equipment was used to application of oil emails, lacquers,

epoxies, two-component substances and materials of similar

properties, it is necessary to use only solvents, recommended by

manufacturers of the substances.

After completion of the works the equipment should be regularly

cleaned. We recommend to develop the maintenance and cleaning

regular schedule to ensure reliable function and operation life of the

equipment.

CAUTION

Never put your fingers and/or hand into the spraying beam. The liquid may

cause very hazardous injury.

In case of the injury immediately search the doctor and notify him on type of

the material penetrating the skin.

Do not disassemble any parts of the gun, when the equipment is pressurized!

AIntenAnCe

surface. Clean always by applicable solvent recommended by

the manufacturer of the material.

and pin in the gun body groove by several drops of the oil.

otes for

contaminants).

instructions of manufacturers of the materials.

rInCIPles

-f

rouble

ree

PerAtIon