Durr EcoGun 615 Посібник з експлуатації та технічного обслуговування - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Фарборозпилювач Durr EcoGun 615. Durr EcoGun 615 20 сторінок. Automatic air spraying gun
Друкувати сторінкуEcoGun 615
MAINTENANCE AND CLEANING
C
leAnIng And
1. Prevent drying of the applied material in the gun and on the
2. Do not clean the holes in the nozzle system by metal objects.
3. As needed, grease the thread of the sleeve nut of the air jet
I
mPortAnt
1. Cleanness of whole nozzle system.
2. Properly treated air for spraying (free of water, oil and other
3. Filtered applied material of proper viscosity - follow
4. Follow the recommended pressures for the atomizing air.
If the equipment was used to application of oil emails, lacquers,
epoxies, two-component substances and materials of similar
properties, it is necessary to use only solvents, recommended by
manufacturers of the substances.
After completion of the works the equipment should be regularly
cleaned. We recommend to develop the maintenance and cleaning
regular schedule to ensure reliable function and operation life of the
equipment.
CAUTION
Never put your fingers and/or hand into the spraying beam. The liquid may
cause very hazardous injury.
In case of the injury immediately search the doctor and notify him on type of
the material penetrating the skin.
Do not disassemble any parts of the gun, when the equipment is pressurized!
10
m
AIntenAnCe
surface. Clean always by applicable solvent recommended by
the manufacturer of the material.
and pin in the gun body groove by several drops of the oil.
n
otes for
contaminants).
instructions of manufacturers of the materials.
P
rInCIPles
t
-f
rouble
ree
o
PerAtIon