Elsner 30167 Installation et réglage - Page 10

Parcourez en ligne ou téléchargez le pdf Installation et réglage pour {nom_de_la_catégorie} Elsner 30167. Elsner 30167 16 pages.

North
1
South
Place the ring horizontally. Adjust the angle using the 3 threaded rods and the 3 nuts
between the base and base holder using the enclosed circular level. Then use the en-
closed fork wrenches to fix the base with the 3 nuts, which are located on the bottom
end of the threaded rods.
Wind can only be recorded correctly if the ring is horizontal.
Fig. 9: Front and side view
Weather Station Suntracer RS485 pro • Version: 20.09.2021 • Errors excepted. Subject to technical changes.
8
Fig. 8: View from above
Align the device along the north-south axis.
The base (Fig. 8, no. 1) must be in the north,
the ring must face south.
Use the screw to fix the weather station in the
base holder (Fig. 7, no. 1) using the enclosed
fork wrench.
Installation
Horizontal