Elsner 30167 Installation et réglage - Page 8

Parcourez en ligne ou téléchargez le pdf Installation et réglage pour {nom_de_la_catégorie} Elsner 30167. Elsner 30167 16 pages.

Imprimer la page

3.3. Device connection

ATTENTION!
Sensitive sensors!
•
Only hold the device by the base.
•
Do not mechanically load (bend) the ring and connections.
Caution Lever effect!
The connection to the RS485 bus and the auxiliary voltage is via the bushing in the
base. To do this, screw the base by the base holder.
The cable can be passed through the mast extension or out between base and base
holder.
Weather Station Suntracer RS485 pro • Version: 20.09.2021 • Errors excepted. Subject to technical changes.
6
Fig. 3: View from below (base)
Screw the M8 plug connector on the connec-
tion cable to the connection socket.
1
Connection socket
1
Fig. 4: Cable routing
in mast extension
Installation