DUSKWORK VCO V2 Manuel de construction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de construction pour {nom_de_la_catégorie} DUSKWORK VCO V2. DUSKWORK VCO V2 7 pages.

| DUSKWORK.NET | Self-Tuning VCO V2 Build Guide

Step 9a: Once all the parts have been soldered, it's time to program the module. For this,

you'll need the USB Tiny programmer, along with AVRDUDESS programming app which you

can find online. There are many good guides out there for how to download this. To program,

set the settings as they are below:

Programmer = USBtiny Simple USB Programmer

Port: USB

MCU: ATmega328P

Presets: Arduino Uno

Fuses & Lock Bits: Select 'set fuses'

For the 'Flash' file, you need to download the latest firmware (it's a .hex file) on the product

page on Duskwork.net – this is the firmware for the self-tuning part of this module. Without

this, the module won't tune itself.