DUSKWORK VCO V2 빌드 매뉴얼 - 페이지 5

{카테고리_이름} DUSKWORK VCO V2에 대한 빌드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUSKWORK VCO V2 7 페이지.

| DUSKWORK.NET | Self-Tuning VCO V2 Build Guide

Step 9a: Once all the parts have been soldered, it's time to program the module. For this,

you'll need the USB Tiny programmer, along with AVRDUDESS programming app which you

can find online. There are many good guides out there for how to download this. To program,

set the settings as they are below:

Programmer = USBtiny Simple USB Programmer

Port: USB

MCU: ATmega328P

Presets: Arduino Uno

Fuses & Lock Bits: Select 'set fuses'

For the 'Flash' file, you need to download the latest firmware (it's a .hex file) on the product

page on Duskwork.net – this is the firmware for the self-tuning part of this module. Without

this, the module won't tune itself.