Elsner Corlo Touch KNX Spécifications techniques et instructions d'installation - Page 9
Parcourez en ligne ou téléchargez le pdf Spécifications techniques et instructions d'installation pour {nom_de_la_catégorie} Elsner Corlo Touch KNX. Elsner Corlo Touch KNX 12 pages. Display and touch switch
Également pour Elsner Corlo Touch KNX : Spécifications techniques et instructions d'installation (2 pages)
Imprimer la page
Settings > System > Service > KNX
4.
Maintenance and care
Fingerprints on the glass area and frame are best removed with a cloth moistened with
water or a microfiber cloth. Do not use an abrasive cleaning agent or aggressive
cleansing agents.
For cleaning of the screen, the „cleaning mode" can be used, that is activeted via the
display.
Settings > Cleaning Mode
During a period set in the ETS, the touch function is disabled then and the screen can
be cleaned.
5.
Load individual images
5.1. Images for screensaver
Images that are shown as the screensaver must be stored on a micro SD card. In order
that the system can recognize the SD card, carry out a reset in the menu after inserting
it
Settings> System > Reset
Display Corlo Touch KNX • Status: 06.08.13 • Technical changes and errors reserved.
9
KNX programmming LED ON:
Programming mode active.
KNX programming LED OFF:
Programming mode off.
The current address is displayed (Address
15.15.250 when delivered).
Maintenance and care