Datalogic MAGELLAN 8400 Manuel de démarrage rapide - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Datalogic MAGELLAN 8400. Datalogic MAGELLAN 8400 18 pages.
Également pour Datalogic MAGELLAN 8400 : Fiche de référence rapide (2 pages)
Imprimer la page
LED
INDICATION
Scale (Yellow) LED on steady
a
Scale at Zero
a
Scanner (Green) LED on steady and
Scanner Active
dim
(Normal Mode)
Good Read Indi-
Scanner (Green) LED - bright flash
a
cation
Scanner (Green) LED - Continuous
Program Mode
flashing 1 second on, 1 second off
Indication
Scanner (Green) LED flashes 10 mS
Sleep Mode
on, 1990 mS off
Indication
Scanner (Green) LED 100 mS on,
Host Disabled
900 mS off
Audible low error tone 1 second
Field Replace-
able Unit (FRU)
Green and Yellow LEDs flash alter-
Warning (Error
nately
Mode)
Scanner (Green) LED flashes a
coded sequence in concert with the
speaker.
FRU Indication
a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled. Your scanner
may not be programmed to display all indications.
4
Table 1. Scanner and Scale Indications
DURATION
COMMENT
The scale is at rest and reads zero weight. The
scale is ready to weigh.
The scanner is ready for operation. Scanning is
immediately available.
Indicates a bar code has been read and
decoded.
Indicates the scanner is in Label Programming
Mode. Cycle power to exit Programming Mode.
The scanner motor and/or laser have automati-
cally switched off and the unit has entered Sleep
Mode due to extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been
detected. Consult the Product Reference Guide
for more details. If a low tone is heard, but con-
tinuous flashing is not observed, the scanner
can still function in a limited capacity. Call sys-
tems support for service in either case.
Occurs ONLY upon Volume/Tone button push
following an FRU warning indication. Enables
service technicians to identify FRU failures.
Magellan
TM
8300/8400