AGRI-COVER SNOWSPORT 180 Manuel d'instructions d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} AGRI-COVER SNOWSPORT 180. AGRI-COVER SNOWSPORT 180 12 pages. Utility plow
Imprimer la page
2. ASSEMBLING SNOWPLOW (Continued)
NOTE: Rubber blade should be room temperature before assembling.
C. With brackets facing back of blade, align rubber groove with blade mounting channel.
D. Slide rubber into channel in bottom of blade and center.
TIP: Apply soapy water solution to top of rubber blade and aluminum blade mounting
channel for easier assembly.
E. Locate factory marks on back of blade. Place slide hinge on blade as shown and align
both lower holes with marks on blade.
TIP: When mounted, slide hinges should measure about 14-1/2" apart.
Aluminum blade
Factory marks for hole
locations on blade
8
Back side of blade
Skid brackets face back side
of aluminum blade
Slide hinge