Dataq Instruments DI-188 Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dataq Instruments DI-188. Dataq Instruments DI-188 13 pages. 4-channel open source usb data acquisition starter kit
Imprimer la page
4. Controls, Indicators, and
Connections
USB-C Connection
To use DI-188, one needs to purchase a USB-C cable to connect and power the instrument through your computer's
USB port.
Connect Input Signals
Make input signal connections to the 8-position screw terminals. Each terminal is labeled directly on the circuit board
DI-188 Signal Connections
Refer to the following for screw terminal port identification.
Ch#: Analog channels 1-4 (±10VFS, ±100V transient Max.)
Connect Signal Leads
Connect signal leads to the DI-188:
1.
Insert the stripped end of a signal lead into the desired terminal directly under the screw.
2.
Tighten the pressure flap by rotating the screw clockwise with a small screwdriver. Make sure that the pressure
Controls, Indicators, and Connections
7
DI-188 Hardware Manual