Dataq Instruments DI-188 사용자 설명서 - 페이지 13

{카테고리_이름} Dataq Instruments DI-188에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataq Instruments DI-188 13 페이지. 4-channel open source usb data acquisition starter kit

Dataq Instruments DI-188 사용자 설명서
4. Controls, Indicators, and
Connections

USB-C Connection

To use DI-188, one needs to purchase a USB-C cable to connect and power the instrument through your computer's
USB port.

Connect Input Signals

Make input signal connections to the 8-position screw terminals. Each terminal is labeled directly on the circuit board

DI-188 Signal Connections

Refer to the following for screw terminal port identification.
Ch#: Analog channels 1-4 (±10VFS, ±100V transient Max.)

Connect Signal Leads

Connect signal leads to the DI-188:
1.
Insert the stripped end of a signal lead into the desired terminal directly under the screw.
2.
Tighten the pressure flap by rotating the screw clockwise with a small screwdriver. Make sure that the pressure

Controls, Indicators, and Connections

7
DI-188 Hardware Manual