DV8 OFFROAD SPEC Series Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DV8 OFFROAD SPEC Series. DV8 OFFROAD SPEC Series 10 pages. Rear bumper for 2018+ jeep jl wrangler
Également pour DV8 OFFROAD SPEC Series : Manuel d'installation du produit (10 pages), Manuel d'installation (12 pages), Manuel d'installation (9 pages)
INSTALLATION
MANUAL
REAR INSTALL
STEP 12 |
For the rears, DV8 provides
both nutserts and M8 nuts. Depending on
the inner fender used, the kits allows for
both options.
For the M8 nutserts, you will need to drill
out the mounting hole to 7/16.
Tip: Place the fender on the vehicle as a
guide to determine which holes are used for
mounting
STEP 13 |
Install the fender flare
onto the vehicle using the provided M8
hardware with a 5mm allen bit (and
13mm wrench if using nuts).
Note: Assistance is recommended to prevent
injury or damage to the product and vehicle.
Double check all hardware is secure.
Repeat process for other side.
NEED HELP?
855-680-9595