Datavideo SE-1000 Manuel complémentaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Datavideo SE-1000. Datavideo SE-1000 7 pages. Datavideo se-1000 switcher: supplementary guide
Également pour Datavideo SE-1000 : Manuel de référence (4 pages)

Imprimer la page

4 cameras & 1 computer with 2 simultaneous outputs

1) Connect your cables as shown in the diagram above.

2) Conﬁ gure the switcher for your input signal

type. Press FUNC and SETUP and select the F1

SETUP

FUNC

setting "FORMT 4/15". Available formats are:

PGM

480/59i, 576/50i, 720/59p, 720/50p,

1080/59i,

1080/50i. Press F4 to conﬁ rm

your selection.

For this quick guide, we will use 4 cameras plus one computer source.

The next step will require us to conﬁ gure the internal converters to

output the correct signal type.

4) Turn the "Format/Standards Converter" dial

CH1

FN01

(above the T-bar) to CH1 and press to conﬁ gure

Channel 1 . Note: we are conﬁ guring the internal

converter ' s output signal type. The built-in

converters will auto-detect the input signal type.

FORMAT/STANDARD

CONVERTER

5) In CH1, "FN01" sets the

output to SD or HD by

pressing the selector and

turning it to cycle the setting.

To deselect the function, press the knob and turn

the dial to the right to set to "FN02".

SE-1000 Applications

FORMT

| MODE

4/15

| 480/59i

| EXEC

CH1

FN02

480i

CVBS

FORMAT/STANDARD

CONVERTER

6) In CH1, "FN02" sets the signal output type. TLM-433 monitors

require composite video. Adjust the signal output type by pressing

the "Format/Standards Converter" knob and select 480iCVBS".

7) To conﬁ gure the switcher's DVI computer input, press FUNC and

SETUP to enter the setup menu.

Rotate the F1 knob until

"DVIIN 2/15" is displayed.

Most computer sources will

work best with "ANLG" and

"FULL" selected. Recommended

screen resolution is 1024x768.

8) Now to conﬁ gure the button crosspoints. Press FUNC and XPT to

enter the crosspoint setup. Turn

the F1 knob to "XPTAS 2/3" and

set the cross points as follows:

XPT 1 = IN1

XPT 2 = IN2

XPT 3 = IN3

XPT 4 = IN4

XPT 5 = DVI

XPT 6 = BLK

Your switcher is now set up for a 4 camera shoot!

DVIIN

| MODE

| SCAL

2/15

| ANLG

| FULL

XPTAS

| XPT

| SIG

2/3

IN1