Datavideo TP-600 Manuel d'instruction - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Datavideo TP-600. Datavideo TP-600 16 pages. Eng prompter
Imprimer la page
PROMPTER KIT FOR ENG CAMERAS
8. Fit the adjustable mounting bracket with locking lever, item F, to the lower prompter rail item B.
Marry the mounting hooks in item B in the holes in the bottom of item F to secure item F to B.
It should slide and click into place.
5.
Slide the Glass frame, item G, on to the front of
the TP-600 ENG prompter rail, item A. Ensure
the upper part of the Glass Frame, Item G, is
leaning away from the camera position and
secure with the two wing nut screws, item H.
6.
There are two slots on the inside left and right of
the Glass Frame, Item G. Guide/slide 60/40
Mirror Glass sheet, item J, into these slots from
above.
The Red circle sticker on the Mirror Glass, item
J, should be facing camera position / lens.
The Green circle sticker on item J should be
facing
toward
commentator.
7.
Secure the glass sheet within the frame using the
cross head screws at the top of each frame slot.
9.
Decide if you need to use the TP-600 ENG
camera riser block or not.
Ideally you want the lens of your camera
positioned as close to the centre of the 60/40
mirror glass as possible.
In some cases depending on your camera and its
ENG camera plate the camera lens may already
be high enough.
8
TP-600
the
on
screen
talent
/