4tronix Pan Servo Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 4tronix Pan Servo. 4tronix Pan Servo 7 pages. Pan & tilt kit for pi2go and pi2go-lite

Imprimer la page

Step 7: Fit the Tilt Servo Mount Assembly to the Pan Servo

Use 2 of the 6mm self-tapping screws provided. Do NOT use the 2 self-tapping screws in the

servo bag as they are too long

The holes in the servo arm plate line up with the third hole out from the centre on each side of

the servo arm.

Step 8: Fit the Tilt Servo into the Servo Mount

This time, push the servo in from the back of the board and screw in using the last 2 of the

6mm M2.5 screws

Attach the straight servo arm using the small screw in the servo bag. Fit it so that it runs top

to bottom as shown, when the servo is in its middle position