4tronix Pan Servo Manual - Page 5
Browse online or download pdf Manual for Robotics 4tronix Pan Servo. 4tronix Pan Servo 7 pages. Pan & tilt kit for pi2go and pi2go-lite
Step 7: Fit the Tilt Servo Mount Assembly to the Pan Servo
Use 2 of the 6mm self-tapping screws provided. Do NOT use the 2 self-tapping screws in the
servo bag as they are too long
The holes in the servo arm plate line up with the third hole out from the centre on each side of
the servo arm.
Step 8: Fit the Tilt Servo into the Servo Mount
This time, push the servo in from the back of the board and screw in using the last 2 of the
6mm M2.5 screws
Attach the straight servo arm using the small screw in the servo bag. Fit it so that it runs top
to bottom as shown, when the servo is in its middle position