Dymo RhinoPRO 5000 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dymo RhinoPRO 5000. Dymo RhinoPRO 5000 14 pages. User guide
Également pour Dymo RhinoPRO 5000 : Référence rapide (2 pages), Spécifications techniques (2 pages), Manuel de l'utilisateur (13 pages)
Imprimer la page
The default value is 17.5 mm (0.7") and can be
set in increments of 0.1 mm (0.005").
3. Enter the total number of module blocks on one
row and press
.
4. Enter the size for each component (X=?) and
press
after each module.
5. Enter text for the first module and press
Press
to clear the text.
6.
+
0
7. Repeat steps 5 and 6 until all module labels are
printed.
8. Press
+
to feed the tape after the last
module and then cut the label using the Cutter
lever.
Printing Vertical Labels
Single-line labels can be printed with
the text running vertically.
To print vertically
1. Press
.
2. Enter the text for your label and
press
G
.
Printing Barcode Labels
The printer can generate two types of barcodes:
CODE-39 and CODE-128. You can only print a
barcode on 19 mm (3/4") label tape.
The barcode prints horizontally along the label with
the text in small print underneath the barcode. You
can optionally add text before and after the
barcode. Or, you can add text above and below the
barcode by creating a multi-line label. See
Creating Multi-Line Labels on page 6.
To create a barcode
1. Enter the text you wish to appear before the
barcode on the label. (Optional)
2. Press +
.
3. Select CODE-39 or CODE-128, and press
Manual_RhinoPRO5000_WEU.indd 9
4. Enter the text for the barcode between the
barcode symbols ( ) and press
5. Enter any text you wish to appear after the
barcode. (Optional)
6. Press
G
.
Printing Options
.
G
You can choose to print multiple copies of the same
label, print serialized labels, or print a combination
of both.
Printing Multiple Copies
You can print up to 99 copies of the same label at
one time. When printing multiple copies, a dotted
cut-line is printed between each label.
To print multiple copies
1. Press +
G
;
2. Press the
copies to print. The default is 2 copies.
3. Press the
:
copies (maximum is 99).
4. Press
or
You may notice a brief pause in printing
between each label for more complex formats.
When printing is finished, the number of copies to
print returns to 2.
Advancing the Label Tape
The default leader space for all labels is
approximately 10 mm (0,4"). To add additional
blank space to the beginning or end of your label,
you can feed the tape in 6 mm (0.25") increments.
Press
+
➤
.
.
.
arrow to increase the number of
arrow to decrease the number of
to begin printing.
G
.
23-07-2004 10:51:38
9
9