- ページ 9

ラベルメーカー Dymo RhinoPRO 5000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dymo RhinoPRO 5000 14 ページ。 User guide
Dymo RhinoPRO 5000 にも：クイック・リファレンス (2 ページ), 技術仕様 (2 ページ), ユーザーマニュアル (13 ページ)

ページを印刷する

The default value is 17.5 mm (0.7") and can be

set in increments of 0.1 mm (0.005").

3. Enter the total number of module blocks on one

row and press

4. Enter the size for each component (X=?) and

press

after each module.

5. Enter text for the first module and press

Press

to clear the text.

7. Repeat steps 5 and 6 until all module labels are

printed.

8. Press

to feed the tape after the last

module and then cut the label using the Cutter

lever.

Printing Vertical Labels

Single-line labels can be printed with

the text running vertically.

To print vertically

1. Press

2. Enter the text for your label and

press

Printing Barcode Labels

The printer can generate two types of barcodes:

CODE-39 and CODE-128. You can only print a

barcode on 19 mm (3/4") label tape.

The barcode prints horizontally along the label with

the text in small print underneath the barcode. You

can optionally add text before and after the

barcode. Or, you can add text above and below the

barcode by creating a multi-line label. See

Creating Multi-Line Labels on page 6.

To create a barcode

1. Enter the text you wish to appear before the

barcode on the label. (Optional)

2. Press +

3. Select CODE-39 or CODE-128, and press

Manual_RhinoPRO5000_WEU.indd 9

4. Enter the text for the barcode between the

barcode symbols ( ) and press

5. Enter any text you wish to appear after the

barcode. (Optional)

6. Press

Printing Options

You can choose to print multiple copies of the same

label, print serialized labels, or print a combination

of both.

Printing Multiple Copies

You can print up to 99 copies of the same label at

one time. When printing multiple copies, a dotted

cut-line is printed between each label.

To print multiple copies

1. Press +

;

2. Press the

copies to print. The default is 2 copies.

3. Press the

copies (maximum is 99).

4. Press

You may notice a brief pause in printing

between each label for more complex formats.

When printing is finished, the number of copies to

print returns to 2.

Advancing the Label Tape

The default leader space for all labels is

approximately 10 mm (0,4"). To add additional

blank space to the beginning or end of your label,

you can feed the tape in 6 mm (0.25") increments.

Press

➤

arrow to increase the number of

arrow to decrease the number of

to begin printing.

23-07-2004 10:51:38