- ページ 10
ラベルメーカー Dymo RhinoPRO 5000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dymo RhinoPRO 5000 14 ページ。 User guide
Dymo RhinoPRO 5000 にも： クイック・リファレンス (2 ページ), 技術仕様 (2 ページ), ユーザーマニュアル (13 ページ)
ページを印刷する
Serializing Your Labels
You can print serialized labels numerically or
alphabetically. Numbers and letters can be
incremented from 1-99.
You can serialize any number or letter by placing
the cursor under the position to be incremented,
such as the number 2 in 123 or the letter B in ABC.
For example, with the cursor under the 2 in 123
and the increment #=3, the resulting labels would
print as 123, 133, and 143.
123
Figure 10
When the letter Z or the number 9 is reached
during serialization, a letter or number is added to
increase the increment. For example, Z increments
to AA and 9 increments to 10.
When a space is present in a string to be
serialized, only the numbers or letters after the
space are serialized.
To serialize your labels
1. Enter the text for your label.
2. Use the arrow keys to move the cursor under the
letter or number to serialize.
3. Press
.
4. Enter the number of labels you wish to print and
press
to begin printing. Enter 1-99 for
G
numbers and for letters.
To print multiple copies of the same serialized
label, choose
+
and enter the number of
G
copies of each label to print. See Printing Multiple
Copies on page 9 and Figure 11.
123
123
133
Figure 11
10
10
Manual_RhinoPRO5000_WEU.indd 10
133
143
133
143
143
Adjusting Print Quality (Advanced)
Depending on the label material you choose, you
may need to lighten or darken the print on the label.
Adjusting the print head temperature allows you to
±
control the print quality (
20).
To set the print head temperature
1. Press
+
.
2. Use the arrow keys to select the print head
temperature and press
3. Repeat as necessary until you are satisfied with
the print quality.
Cleaning Your Printer
Your printer is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your printer from time to time to keep it
working properly. Clean the cutter blade each time
you replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter lever to expose
the cutter blade.
3. Use a cotton ball and alcohol to clean both sides
of the blade.
4. Release the cutter lever.
To clean the print head
Clean the print head using the cleaning tool
➤
located inside the tape compartment lid.
You can also use the optional cleaning pen to clean
the cutter blade and print head.
.
23-07-2004 10:51:43