Dymo PS20DL Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dymo PS20DL. Dymo PS20DL 8 pages. 20 lb downloadable postal scale

Imprimer la page

• Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument and

MUST BE HANDLED WITH EXTREME CARE.

• The scale has been calibrated at the factory and will not need to be calibrated again.

Technical Specifications

Capacity

Resolution

Units

Auto-off

Operating Temperature

Interface

Power

For information about our other scale products, visit www.dymo.com.

Troubleshooting

Problem/Error Message

No display

LOW BATT is displayed

UNDER LOAD is displayed

OVER LOAD is displayed

0.0

Display reads

with an item on the

platform

If you need further assistance, contact Technical Support at (877) 724-8324. You can also

obtain support at www.dymo.com.

20.0 pounds (9 kg)

0.1 oz. (2 g)

lb./oz. (kg/g)

After two minutes of inactivity

40° - 104° F (4.5° - 40° C)

Serial

120 V AC adapter or six AAA batteries

Solution

Ensure the scale is plugged in, or replace the batteries.

Replace the AAA batteries.

A Tare value was displayed and the items were removed from

the scale. Press Tare (0) to reset the scale to zero.

The item on the scale platform exceeds the maximum capacity

of the scale. Remove the item immediately to prevent damage

to the scale.

This can happen because:

• The Tare button was pressed while an item was on the scale.

• Power to the scale was disconnected or turned off and then

on again with an item on the scale.

In both of these cases, remove the item from the platform and

press the Tare (0) button to return the display to 0.0.