5D TACTICAL Router JigPro Manuel d'instructions - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} 5D TACTICAL Router JigPro. 5D TACTICAL Router JigPro 13 pages.
Également pour 5D TACTICAL Router JigPro : Manuel d'instructions (7 pages)

Imprimer la page

5D TACTICAL Router JigPro Manuel d'instructions

ASSEMBLY

Thank you for your Router Jig Pro purchase.

you have chosen to spend your hard earned money with us, and because of that, we strive for 100%

customer satisfaction. Your Router Jig Pro carries a LIFETIME WARRANTY against manufacturer's

defects. Please contact us by phone at 508-834-4223 or email [email protected] with any

questions or concerns regarding the use of your Router Jig Pro.

tion of 80% lowers are available for purchase on our website, 5DTactical.com.

PART 1: JIG ASSEMBLY

1-1

Clean surface of the 80% receiver

and apply masking tape to the sides.

1-2

Apply the Buffer Plate to the back

of the receiver as shown. Use grey

Buffer Plate for AR-15/AR-9 receivers and

black Buffer Plate for .308/AR-10 receivers.

1-3

Loosely thread the Buffer Adapter

into the receiver until the Buffer

Plate is pressed against the back of the receiver.

508-834-4223

5DTACTICAL.COM

At 5D Tactical, we understand

Replacement parts and a selec-

1-4

Loosely install the Takedown

Adapter to the Guide Plate using (2)

Jig Screws. Use grey Takedown Adapter for

AR-15/AR-9 receivers and black Takedown

Adapter for .308/AR-10 receivers.

AR-15/AR-9

1-5

Align the receiver with the Takedown

Adapter, pass the Takedown Pin

through the receiver and adapter. Use the

correct Takedown Pin for the receiver.

AR-15/AR-9

1-6

Align the Buffer Plate with the

holes in the rear of the Guide Plate.

Loosely install (2) Jig Screws.

AR-15/AR-9

.308/AR-10