Hi-Copy DMX-8631 E Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Hi-Copy DMX-8631 E. Hi-Copy DMX-8631 E 19 pages. Fully stand-alone cd duplicator device

Imprimer la page

DMX-8631E/F/U Installation Guide

4. Front Panel :

There are three push buttons and three LEDs on the front panel.

Their functions are :

Mode

: This key has to work with Run and Speed keys to enter

special function modes.

Mode + Run

Mode + Speed

* :

Press and halt Mode key, then press Run (or Speed) key. Release

Run (or Speed ) key, and finally, release Mode key.

Speed : The duplication will perform a speed test first. It will try the

maximum speed, 4x speeds, and finally 1x speeds. Once a

speed test passes, it will use that speed to perform the

duplication.

Run

: This is the default setting of using maximun speed to

duplicate CD.

5. Update Firmware

There are many new models and faster speed CD-RW drives

coming to the market everyday. In order to provide the best service,

DMX-8631E/F/U allows user to upgrade firmware privately. User can

download new firmware from http://www.domex.com.tw, then use a

PC with CD-RW drive to write it on a CD-R, put this CD-R into CD-

ROM drive of DMX-8631E/F/U, and press Mode + Run keys

together to upgrade the firmware. During the process, when green

LED is still lighting, please do not turn off power of DMX-8631E/F/U,

otherwise, damage might happen.

off the power, then turn on again for normal operation.

: Upgrade controller firmware.

: Erase CD-RW content.

When green LED is off, please turn