Hi-Copy DMX-8631 E Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Дисковий дублікатор Hi-Copy DMX-8631 E. Hi-Copy DMX-8631 E 19 сторінок. Fully stand-alone cd duplicator device
Друкувати сторінкуDMX-8631E/F/U Installation Guide
4. Front Panel :
There are three push buttons and three LEDs on the front panel.
Their functions are :
Mode
: This key has to work with Run and Speed keys to enter
special function modes.
Mode + Run
Mode + Speed
* :
Press and halt Mode key, then press Run (or Speed) key. Release
Run (or Speed ) key, and finally, release Mode key.
Speed : The duplication will perform a speed test first. It will try the
maximum speed, 4x speeds, and finally 1x speeds. Once a
speed test passes, it will use that speed to perform the
duplication.
Run
: This is the default setting of using maximun speed to
duplicate CD.
5. Update Firmware
There are many new models and faster speed CD-RW drives
coming to the market everyday. In order to provide the best service,
DMX-8631E/F/U allows user to upgrade firmware privately. User can
download new firmware from http://www.domex.com.tw, then use a
PC with CD-RW drive to write it on a CD-R, put this CD-R into CD-
ROM drive of DMX-8631E/F/U, and press Mode + Run keys
together to upgrade the firmware. During the process, when green
LED is still lighting, please do not turn off power of DMX-8631E/F/U,
otherwise, damage might happen.
off the power, then turn on again for normal operation.
: Upgrade controller firmware.
: Erase CD-RW content.
When green LED is off, please turn
4
*
*