Active SmartHome Repeater Manuel d'installation et d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Active SmartHome Repeater. Active SmartHome Repeater 15 pages. Active smarthome system

2. 2. 2. 2.
Refer to the device manuals on how to send the learn code from a particular
module (usually a Test or Learn button is pressed). If the Repeater receives a
learn code from a new device, it will emit 1 long beep and the Blue LED will
light up for one second to indicate the learn procedure has been successful. If
the device has already been configured on the Repeater, it will emit 2 beeps
and the blue LED will light up for one second. A maximum of 60 devices can
be paired, but if a user attempts to set up more, the Repeater will emit 4
beeps.
3. 3. 3. 3.
When the learn procedure has been completed, turn DIP Switch 1 to Off. The
Repeater will emit 1 long beep along with the yellow LED fading out as the
Repeater returns to Normal Mode.

3 3 3 3 .3 .3 .3 .3. . . . Walk Test Mode

Walk Test Mode
Walk Test Mode
Walk Test Mode
- Repeater connected to the Active SmartHome Gateway
To test the signal is within range, go back to the
application and enter
Active SmartHome Platform. Press the Test Button once on the Repeater and check
that it has been recognized by the Gateway, and so displayed on the platform. The
device operates smoothly and easily if it has been successfully tested in a suitable
location.
- Devices connected to the Repeater
The Walk Test Mode allows the connection status of the devices currently paired to
the Repeater to be checked.
R e p e a t e r
Walk Test
Walk Test
Walk Test
Walk Test
. Start the test by pressing the
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
I ns t a l l a t i on a nd O pe ra t i o n G ui d e
Settings
Settings
Settings
Settings
menu in the
Start
Start
Start
Start
Security
Security
Security
Security
button on the
P a g e | 1 0