- ページ 10

リピーター Active SmartHome RepeaterのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Active SmartHome Repeater 15 ページ。 Active smarthome system

2. 2. 2. 2.

Refer to the device manuals on how to send the learn code from a particular

module (usually a Test or Learn button is pressed). If the Repeater receives a

learn code from a new device, it will emit 1 long beep and the Blue LED will

light up for one second to indicate the learn procedure has been successful. If

the device has already been configured on the Repeater, it will emit 2 beeps

and the blue LED will light up for one second. A maximum of 60 devices can

be paired, but if a user attempts to set up more, the Repeater will emit 4

beeps.

3. 3. 3. 3.

When the learn procedure has been completed, turn DIP Switch 1 to Off. The

Repeater will emit 1 long beep along with the yellow LED fading out as the

Repeater returns to Normal Mode.

3 3 3 3 .3 .3 .3 .3. . . . Walk Test Mode

Walk Test Mode

- Repeater connected to the Active SmartHome Gateway

To test the signal is within range, go back to the

application and enter

Active SmartHome Platform. Press the Test Button once on the Repeater and check

that it has been recognized by the Gateway, and so displayed on the platform. The

device operates smoothly and easily if it has been successfully tested in a suitable

location.

- Devices connected to the Repeater

The Walk Test Mode allows the connection status of the devices currently paired to

the Repeater to be checked.

R e p e a t e r

Walk Test

. Start the test by pressing the

I ns t a l l a t i on a nd O pe ra t i o n G ui d e

Settings

menu in the

Start

Security

button on the

P a g e | 1 0