Gaggenau Vario 400 Series Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gaggenau Vario 400 Series. Gaggenau Vario 400 Series 7 pages. Downdraft ventilation
Également pour Gaggenau Vario 400 Series : Manuel de démarrage rapide (2 pages), Cut-Out Dimensions (4 pages), Installation (2 pages)

Imprimer la page

Color Variants

VL414110

Stainless Steel

Vaentilation element.

VL414110

Vario downdraft ventilation 400 series

Stainless Steel

Vaentilation element.

Air extraction/recirculation with remote

fan unit AR 400/401/413

Comes without blower and AA 490

control knob.

Highly efficient ventilation system at

cooktop level

Up to 4 ventilation elements can be

connected to one blower, operated

by one AA 490 control knob. Control

knob has to be ordered separately.

Felxible power distribution, precise

extraction of cooking vapors only at

the open ventilation element.

Precision crafting of 1/8-inch

stainless steel

For surface mount installation with a

visible edge or for flush installation

Can be perfectly combined with other

Vario products of the 400 series

Minimal planning and easy

installation for air recirculation

Output

Maximum air output in combination

with AR inline blower/ remote blower or

recirculation kit. For CFM info, refer to

the Models & Dimensions, Edition 2013.

Noise level depends on the built-in

situation.

Features

Ventilation flaps will open when

manually pushed down.

Closing element made of stainless

steel, dishwahser-safe.

Metal grease filter with grease dripping

tray, dishwasher-safe.

Sensor-controlled operation of the AR

blower if at least one VL 414 downdraft

unit is open.

No duct connection pieces are

included. Must order AD724040

transition to 5" round duct to vent

downwards/to left or to the right side

and AD724041 adaptor if venting to left

or right side of VL 414 downdraft.

Planning notes

Depending on the type of installation

- surface-/ or flush-mounted, with or

without cover - the specific location of

the control knob positions may vary.

When using the appliance cover VA 440

or adjustment strip VA 450 additional

space for cut-out depth needs to be

considered.

In a combination of Vario cooktops

with at least one appliance cover, the

adjustment strip VA 450 is required.

In a combination of several Vario 400

series cooktops a connection strip

must be used. Depending on the type

of installation - surface-/ or flush-

mounted, with or without cover - the

respective VA 420 connecting strip

must be used.

For flush installation the edge height

in the cut-out needs to be at least 1/2"

and for surface-mount 3/8". Ensure a

continuous cut surface of 90°.

The weight capacity and stability,

especially in case of thin countertops,

must be supported using suitable

substructures. Take the appliance

weight and additional loads into

account.

Flush installation is possible in

countertops made of stone, synthetics

or solid wood. Heat resistance and

watertight sealing of the edges must

be observed. For other materials,

please consult with your countertop

manufacturer.

Product Features

Operating Mode

Convertable: Ducted / Recirculating

Number of speed settings

Delay Shut off modes

Silence level (dBA)

Required accessories

Optional accessories

AA414010

Number of lights

Type of lamps used

Total power of the lamps (W)

Grease filter material

Washable stainless steel

Grease filter type

Multilayer cassette

Clean filter reminders

Consumption and connection features

UPC code

825225901440

Material

Stainless steel

Watts (W)

Current (A)

Volts (V)

Frequency (Hz)

60; 50

Approval certificates

CE, VDE

Power Cord Length

Plug type

Overall appliance dimensions (HxWxD)

(in)

/ x 4 5/16 x 20 15/32

Product packaging dimensions

(HxWxD) (in)

6.69 x 15.35 x 23.22

Height of the chimney (in)

Vertical rise height

Required distance above cooktop/

ranges

Net weight (lbs)

Gross weight (lbs)

Adjustable feet

Motor location

without motor

Maximum CFM

Diameter of air duct (in) top

Diameter of air duct (in) back

Discharge direction

downward

No-return airflow flap

2016-12-30

Page 1

The groove must be continuos and

even, so that uniform placing of the

appliance on the gasket is ensured. Do

not use discontinuos lining.

The joint width may vary due to size

tolerances of the combinations and of

the countertop cut-out.

If installing several Vario products in

individual cut-outs allow for a minimum

distance of 2" inbetween the cooktops.

Air extraction operation in combination

with AR 400/401 remote/inline blower

or recirculation mode with AR 413.

Please refer to page xxx for

recommended configurations of

downdraft ventilations and remote fan

units and the needed ducting elements.

Maximum cooktop width between two

VL downdraft elements is 24".

If used next to gas cooktops, the air

deflector AA414010 is recommended to

ensure maximum performance of the

cooktop.

No duct connection pieces are

included, they must be ordered

separately. Either AD724040 transition

to 5" round duct to connect to bottom/

left/right side of of VL and AD724041

transition ifconnecting duct to left or

right side of VL downdraft.

When connecting 2 VL downdrafts,

2x 5" round ducts are required to

connect to one of the AR blowers.

Note: when connecting 2 VL downdrafts

with AR 401 740 remote blower, an Y-

adaptor is required (can be purchased

at local hardware store).

When connecting 3 or 4 VL downdrafts,

only AR400740 inline blower can be

used.

Please ensure when installing the

exhaust air ducting that no sharp bends

are caused and that the cross-section

of the ducting is not constricted in any

way. This can have an impact on the

blower performance.

Appliance can be snapped into the

countertop from above. Additional

fixing by clamps that are accessible

from the top, clamping range from 1

3/16" to 1 15/16".

Rating

Plan for a 6.6' connection cable

between VL 414 downdraft and AA 490

control knob.