Hi-Link HLK-RM08K Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Hi-Link HLK-RM08K. Hi-Link HLK-RM08K 7 pages. Uart to ethernet application
Également pour Hi-Link HLK-RM08K : Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (9 pages)
Imprimer la page
HLK-RM08K is a new low-cost embedded UART-ETH-WIFI module (serial port - Ethernet - Wireless
network) developed by Shenzhen Hi-Link co., Ltd
This product is an embedded module based on the universal serial interface network standard, built-in TCP /
IP protocol stack, enabling the user serial port, Ethernet, wireless network (wifi) interface between the
conversions.
Through the HLK-RM08K module, the traditional serial devices do not need to change any configuration;
data can be transmitted through the Internet network. Provide a quick solution for the user's serial devices to
transfer data via Ethernet.
二. Bridge mode configuration at web page
1. Restore factory setting. Power on 5V/350MA, and wait for 20s. Pull down ES1 pin more then 6S after
setting up. The system will restart automatically. Then the system is on the factory mode.
2. Connect LAN of module and com port of PC by using net cable.and set the PC static IP :
192.168.16.210 .
3