Hi-Link HLK-RM08K 사용자 설명서 - 페이지 3

{카테고리_이름} Hi-Link HLK-RM08K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-RM08K 7 페이지. Uart to ethernet application
Hi-Link HLK-RM08K에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지), 사용자 설명서 (9 페이지)

페이지 인쇄
Hi-Link HLK-RM08K 사용자 설명서
HLK-RM08K is a new low-cost embedded UART-ETH-WIFI module (serial port - Ethernet - Wireless
network) developed by Shenzhen Hi-Link co., Ltd
This product is an embedded module based on the universal serial interface network standard, built-in TCP /
IP protocol stack, enabling the user serial port, Ethernet, wireless network (wifi) interface between the
conversions.
Through the HLK-RM08K module, the traditional serial devices do not need to change any configuration;
data can be transmitted through the Internet network. Provide a quick solution for the user's serial devices to
transfer data via Ethernet.
二. Bridge mode configuration at web page
1. Restore factory setting. Power on 5V/350MA, and wait for 20s. Pull down ES1 pin more then 6S after
setting up. The system will restart automatically. Then the system is on the factory mode.
2. Connect LAN of module and com port of PC by using net cable.and set the PC static IP :
192.168.16.210 .
3