Gaggenau AC231120 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gaggenau AC231120. Gaggenau AC231120 16 pages.

Imprimer la page

Intensive setting

Activate intensive mode to eliminate strong smells and

odours. In this mode, the extractor hood operates at its

maximum fan setting for a short time. After a short time,

it automatically switches back to a low setting.

Switching on

†

Press the

button on the remote control or the

button for intensive mode on the extractor hood's

control panel.

The

button on the extractor hood's control panel

flashes. Intensive mode is activated.

Note: After 6 minutes, the extractor hood automatically

switches back to the fan setting that was set

beforehand.

Switching off

†

Press the

button on the remote control or the

button on the extractor hood's control panel.

Intermittent mode

The intermittent function automatically switches on the

extractor hood for 10 minutes every hour. After 24

hours, this function switches itself off again.

Note: If intensive mode or the run-on function has been

activated, the intermittent function will not be available.

Switching on

Press and hold the

button on the remote control or

press the μ button on the extractor hood's control

panel.

The μ button on the extractor hood's control panel

lights up. The intermittent function is now on. The

extractor hood starts at power setting 1.

Switching off

Press the ¶ button on the remote control or the

μ button on the extractor hood's control panel.

This switches off the intermittent function.

Run-on function

The run-on function allows the extractor hood to

continue running for a few minutes after it has been

switched off. This eliminates any remaining cooking

smells. The extractor hood will then switch itself off

automatically.

Switching on

Note: If intensive mode or the intermittent function has

been activated, the run-on function will not be available.

Select the power setting.

Press the

button on the remote control or the

button on the extractor hood's control panel.

The

button and the buttons for the selected fan

settings light up on the extractor hood's control

panel. The fan continues to run at this setting for

15 minutes and then switches off automatically

once this time has elapsed. If the lighting has been

switched on, this is also switched off once the run-

on time has elapsed.

Switching off

Press the

button on the remote control or the

button on the extractor hood's control panel.

The run-on function ends and the extractor hood

switches back to the power setting that was previously

set.

Lighting

The lighting will work even if the extractor hood is

switched off.

Switching on

Press the

button on the remote control or the

ž button on the extractor hood's control panel.

Reducing the brightness

Press and hold the

button on the remote control or

the ž button on the extractor hood's control panel until

the brightness has been reduced.

Switching off

Press the

button on the remote control or the

ž button on the extractor hood's control panel.