Gaggenau AC231120 Buku Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kap Ventilasi Gaggenau AC231120. Gaggenau AC231120 16 halaman.
Halaman Cetak
Intensive setting
Activate intensive mode to eliminate strong smells and
odours. In this mode, the extractor hood operates at its
maximum fan setting for a short time. After a short time,
it automatically switches back to a low setting.
Switching on
†
Press the
button on the remote control or the
Ž
button for intensive mode on the extractor hood's
control panel.
Ž
The
button on the extractor hood's control panel
flashes. Intensive mode is activated.
Note: After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set
beforehand.
Switching off
†
Press the
button on the remote control or the
Ž
button on the extractor hood's control panel.
Intermittent mode
The intermittent function automatically switches on the
extractor hood for 10 minutes every hour. After 24
hours, this function switches itself off again.
Note: If intensive mode or the run-on function has been
activated, the intermittent function will not be available.
Switching on
K
Press and hold the
button on the remote control or
press the μ button on the extractor hood's control
panel.
The μ button on the extractor hood's control panel
lights up. The intermittent function is now on. The
extractor hood starts at power setting 1.
Switching off
Press the ¶ button on the remote control or the
μ button on the extractor hood's control panel.
This switches off the intermittent function.
Run-on function
The run-on function allows the extractor hood to
continue running for a few minutes after it has been
switched off. This eliminates any remaining cooking
smells. The extractor hood will then switch itself off
automatically.
Switching on
Note: If intensive mode or the intermittent function has
been activated, the run-on function will not be available.
1
Select the power setting.
K
2
Press the
button on the remote control or the
ž
button on the extractor hood's control panel.
ž
The
button and the buttons for the selected fan
settings light up on the extractor hood's control
panel. The fan continues to run at this setting for
15 minutes and then switches off automatically
once this time has elapsed. If the lighting has been
switched on, this is also switched off once the run-
on time has elapsed.
Switching off
K
Press the
button on the remote control or the
ž
button on the extractor hood's control panel.
The run-on function ends and the extractor hood
switches back to the power setting that was previously
set.
Lighting
The lighting will work even if the extractor hood is
switched off.
Switching on
<
Press the
button on the remote control or the
ž button on the extractor hood's control panel.
Reducing the brightness
<
Press and hold the
button on the remote control or
the ž button on the extractor hood's control panel until
the brightness has been reduced.
Switching off
<
Press the
button on the remote control or the
ž button on the extractor hood's control panel.
7