Active Tools CoxOrb Cobalt Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Active Tools CoxOrb Cobalt. Active Tools CoxOrb Cobalt 4 pages.

Imprimer la page

Clock

Go To Ready

Start

Recording a Split

Stop Timing

Resume Timing

To Clear and Reset

the Timer

Enter Recall

Press & hold CLOCK button.

The Time of Day Clock will be displayed.

Recording a Work Piece

Press START/STOP.

Unit will go to 'READY' mode (all data fields ready to

record).

First boat movement or press START/STOP.

When in 'READY' mode the unit will automatically

start recording on the first movement of the boat.

Alternatively you can press START/STOP again.

During a timed work piece Stroke Rate, Stroke Count,

and Elapsed Time will automatically be recorded.

Work Pieces under 10 seconds long will not be recorded.

Press SPLIT/CLR.

The timer display will freeze and flash for 3 strokes to

indicate that a split has been recorded (the timer will

continue to run internally).

Press START/STOP.

Work Pieces can be stopped at any time. The unit will

return to 'STOP' mode and display the last recorded

figures until the piece is resumed or cleared.

Alternatively, if you stop rowing or paddle very lightly,

elapsed time will flash. If you then press START/STOP

while it is flashing, the time you stopped rowing hard

will be used as the end of the work piece.

Press START/STOP.

Work Piece will resume as a continuation of the

original piece.

Press SPLIT/CLR.

Unit must be in 'STOP' mode.

Recall

Press RECALL.

When in 'RECALL' mode 'MEM' is displayed on screen.