Active Tools CoxOrb Cobalt User Manual - Page 2
Browse online or download pdf User Manual for Monitor Active Tools CoxOrb Cobalt. Active Tools CoxOrb Cobalt 4 pages.
Clock
Go To Ready
Start
Recording a Split
Stop Timing
Resume Timing
To Clear and Reset
the Timer
Enter Recall
Press & hold CLOCK button.
The Time of Day Clock will be displayed.
Recording a Work Piece
Press START/STOP.
Unit will go to 'READY' mode (all data fields ready to
record).
First boat movement or press START/STOP.
When in 'READY' mode the unit will automatically
start recording on the first movement of the boat.
Alternatively you can press START/STOP again.
During a timed work piece Stroke Rate, Stroke Count,
and Elapsed Time will automatically be recorded.
Work Pieces under 10 seconds long will not be recorded.
Press SPLIT/CLR.
The timer display will freeze and flash for 3 strokes to
indicate that a split has been recorded (the timer will
continue to run internally).
Press START/STOP.
Work Pieces can be stopped at any time. The unit will
return to 'STOP' mode and display the last recorded
figures until the piece is resumed or cleared.
Alternatively, if you stop rowing or paddle very lightly,
elapsed time will flash. If you then press START/STOP
while it is flashing, the time you stopped rowing hard
will be used as the end of the work piece.
Press START/STOP.
Work Piece will resume as a continuation of the
original piece.
Press SPLIT/CLR.
Unit must be in 'STOP' mode.
Recall
Press RECALL.
When in 'RECALL' mode 'MEM' is displayed on screen.