GREAT PLAINS 1205NT Manuel de pré-livraison - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de pré-livraison pour {nom_de_la_catégorie} GREAT PLAINS 1205NT. GREAT PLAINS 1205NT 20 pages. End wheel no-till drill
Également pour GREAT PLAINS 1205NT : Manuel d'ajustement des champs (5 pages)

Imprimer la page

Hitching to Tractor

Refer to Figure 7.

Back tractor to drill. Using the screw jack, ad-

just drill tongue to get drawbar under upper

hitch plate (1).

2. Align rear hole in upper hitch plate with large

hole in drawbar. Place lower hitch plate (4)

under drawbar and attach to upper hitch plate

with two 5/8 x 4 inch bolts (5), ﬂat washers (6)

and nylock nuts (7).

3. Bolt top upper hitch plate through hole in

drawbar to lower hitch plate with 1 x 5 1/2 inch

bolt (8), USS ﬂat washer (3) and nylock nut

(2).

4. Securely attach safety chain to drill hitch with

a 3/4 x 2 1/4 inch bolt (10), safety washer (11),

lock washer (12) and nut (13). Then attach to

tractor drawbar.

5. Store jack on top of tongue as shown in

ure 8.

3/24/06

Fig-

Figure 7

Hitching to Tractor

Figure 8

Jack in Storage Position

Setup

13944

13940

150-131Q