GREAT PLAINS 1205NT Руководство по предпродажной подготовке - Страница 15
Просмотреть онлайн или скачать pdf Руководство по предпродажной подготовке для Сельскохозяйственное оборудование GREAT PLAINS 1205NT. GREAT PLAINS 1205NT 20 страниц. End wheel no-till drill
Также для GREAT PLAINS 1205NT: Руководство по регулировке поля (5 страниц)
Печатать страницуHitching to Tractor
Refer to Figure 7.
1.
Back tractor to drill. Using the screw jack, ad-
just drill tongue to get drawbar under upper
hitch plate (1).
2. Align rear hole in upper hitch plate with large
hole in drawbar. Place lower hitch plate (4)
under drawbar and attach to upper hitch plate
with two 5/8 x 4 inch bolts (5), flat washers (6)
and nylock nuts (7).
3. Bolt top upper hitch plate through hole in
drawbar to lower hitch plate with 1 x 5 1/2 inch
bolt (8), USS flat washer (3) and nylock nut
(2).
4. Securely attach safety chain to drill hitch with
a 3/4 x 2 1/4 inch bolt (10), safety washer (11),
lock washer (12) and nut (13). Then attach to
tractor drawbar.
5. Store jack on top of tongue as shown in
ure 8.
3/24/06
Fig-
Figure 7
Hitching to Tractor
Figure 8
Jack in Storage Position
Setup
13
13944
13940
150-131Q