Gaggenau VI 230 112 Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gaggenau VI 230 112. Gaggenau VI 230 112 15 pages.

What to do if a fault arises

The cooking-plate hob fails to heat up and no

lights come on.

❏ Make sure this is the case for all of the cooking

plates.

❏ Make sure the mains electricity supply is in

order.

When I turn the cooking-plate hob on, the

mains fuse box current limiter triggers.

❏ Call Customer Service immediately.

On placing a receptacle on an Induction

cooking plate, the selected cooking plate

indication flashes (the power supply is cut).

❏ Make sure that the receptacle is made of a

ferromagnetic material (it attracts a magnet).

❏ Make sure the diameter of the receptacle base is

big enough.

❏ Check to see if the cooking plate works properly

with other cooking receptacles.

❏ If the cooking-plate hob is turned off and, when

turned back on again, it does not give any light

indications, disconnect it from the mains supply,

wait about 20 seconds and connect it up once

more.

❏ Let the receptacle cool off to make sure it has

not heated up too much on being used.

When boiling or deep-frying for a long period of

time, the receptacle fails to retain temperature.

❏ Check to see if the cooking plate works properly

"from cold". The appliance is equipped with an

automatic power-reduction system to prevent

both overheating when cooking at high

temperatures and cooking without liquid.

❏ If you wish, you can use a different induction-

cooking plate until the previously-used one has

cooled down.