Gaggenau VI 230 112 Інструкція з використання Посібник з використання - Сторінка 14
Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Варильна поверхня Gaggenau VI 230 112. Gaggenau VI 230 112 15 сторінок.
Друкувати сторінкуWhat to do if a fault arises
The cooking-plate hob fails to heat up and no
lights come on.
❏ Make sure this is the case for all of the cooking
plates.
❏ Make sure the mains electricity supply is in
order.
When I turn the cooking-plate hob on, the
mains fuse box current limiter triggers.
❏ Call Customer Service immediately.
On placing a receptacle on an Induction
cooking plate, the selected cooking plate
indication flashes (the power supply is cut).
❏ Make sure that the receptacle is made of a
ferromagnetic material (it attracts a magnet).
❏ Make sure the diameter of the receptacle base is
big enough.
❏ Check to see if the cooking plate works properly
with other cooking receptacles.
❏ If the cooking-plate hob is turned off and, when
turned back on again, it does not give any light
indications, disconnect it from the mains supply,
wait about 20 seconds and connect it up once
more.
❏ Let the receptacle cool off to make sure it has
not heated up too much on being used.
When boiling or deep-frying for a long period of
time, the receptacle fails to retain temperature.
❏ Check to see if the cooking plate works properly
"from cold". The appliance is equipped with an
automatic power-reduction system to prevent
both overheating when cooking at high
temperatures and cooking without liquid.
❏ If you wish, you can use a different induction-
cooking plate until the previously-used one has
cooled down.
29