7inova 7W310 Manuel d'installation rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 7inova 7W310. 7inova 7W310 2 pages. Wireless-n wifi repeater 300mbps
Imprimer la page
WiFi Repeater Web browser initial setup
1
Please use your PC, tablet or smart phone's wireless functions to search
for the device's SSID and connect.
Not connected
Connections are available
Wi-Fi
7inova-535060
Information sent over this network might
be visible to others.
Connect
Connect automatically
7inova-535050
7inova-521635
Open Network and Sharing Center
4
Log in with Username and Password, both default are "admin".
ATTENTION: Default SSID of this device is "current wireless network's SSID+_2EX", you can make clear whether your network is connected through this device;
Please check following
if need to change
working mode
Appendix: Troubleshooting
2
Please click " Connect to the network without setting it up", wait
to connect.
Connect to a Network
Do you want to set up your network?
This is a new router that has not been set up. Click OK to start
setup.
Connect to the network without setting it up.
5
Choose "Repeater", click "Apply"and then click "Search".
Setup your computer's IP before connecting WiFi repeater
1. Click "Start→Control Panel→Network and Internet→Network and SharingCenter→Change adapter settings→Wi-Fi(right click)→Properties", Double click "Internet Protocol Version 4(TCP/IPv4)".
2. To set up the computer IP 192.168.2.x (x arbitrary integer between 2~252), subnet mask of 255.255.255.0, Click "OK". Back to the last interface and click "OK". Then enter http://192.168.2.1
to configure.
Setup your computer's IP after you finish configuration
1. Click "Start→Control Panel→Network and Internet→Network and Sharing Center→Change adapter settings→Wi-Fi(right click)→Properties", Double click "Internet Protocol Version 4(TCP/IPv4)"
2. Select "Obtain an IP address automatically" and "Obtain DSN server address automatically". Click "OK". Back to the last interface and click "OK". Then reconnect to repeater.
(If fails to connect network, Click "Start→Control Panel→Network and Internet→Network and SharingCenter→Change adapter settings→Wi-Fi(right click)→Properties→Diagnosis&Repair";
Or please disconnect, and re-connect after 5 seconds.)
1) Restore Factory Setting: Plug the device into socket, press RESET button around 3-5seconds.
2) Default username: admin, Default password: admin (You can check on the label of device's backside).
3) If get trouble in configure, fail to connect network, pls restore factory settings, then re-configure as per above steps.
3
After connect successfully, enter "http://192.168.2.1" in web browser.
O K
Cancel
6
Select your wanted wireless network in the search list, enter the wireless network's
passward, click "Apply"to finish setup. This device's wireless password is same as
your root-wireless device's wireless password.
Webstie
http://192.168.2.1