DynaColor EDNS V3000 Manuel de configuration - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} DynaColor EDNS V3000. DynaColor EDNS V3000 14 pages.

Lock

Fan Error

RAID Disk Clone Completed

(Plus Models Only)

NOTE: For HDD Cloning Status icons, a number will be shown in the center of the icon to

represent the group of HDD that is cloning. In the mean time, percentage will be displayed

underneath the icon.

NOTE: The Disk Clone Completed icon will be displayed when HDD cloning is completed

and will disappear when any key is pressed.

Connect the DVR via the Remote Software

Setup Requirements:

 Make sure the PC is connected to the Internet.

 Obtain IP address of the Ernitec EDNS V3000. To check the DVR's IP address, press Menu on

the front panel and select <System Setup>  <Network Setup>  <LAN Setup>  <IP> to

check the IP.

Changing Internet Setting:

 Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and

then click the <Security> tab.

 Select <Trusted sites> and click <Sites> to specify its security setting.

 Uncheck "Require server verification (https:) for all sites in this zone". Type the IP address of the

unit in field and click <Add> to add this website to the zone.

 In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>, set

all items to <Enable> or <Prompt>.

 Click <OK> to accept the settings and close the <Security Settings> screen.

Using the Remote Software:

 Start the IE and enter the IP address of the Ernitec EDNS V3000 in the address bar.

 The ActiveX controls and plug-ins dialog will show twice for confirmation; click <YES> to accept

ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC

automatically when the connection is successfully made.

NOTE: Do not enter any leading "0" characters in the address, for example,

"192.068.080.006" should be entered "192.68.80.6".

RAID Disk Correct

(Plus Models Only)

RAID Disk Error

(Plus Models Only)

No RIAD Disk

(Plus Models Only)