GREAT PLANES Electrifly Rifle Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} GREAT PLANES Electrifly Rifle. GREAT PLANES Electrifly Rifle 16 pages.
Imprimer la page
ADDITIONAL ITEMS REQUIRED
Battery Charger
•
A LiPo-capable battery charger and a power source for
the charger is required. One recommended charger is
the Great Planes ElectriFly TritonEQ
(GPMM3155). The TritonEQ can be powered either by
an AC or DC power source and features a built-in LiPo
cell balancer.
•
Another suitable LiPo battery charger is the Great Planes
PolyCharge4
™
DC LiPo charger (GPMM3015). The
PolyCharge4 can charge up to four LiPo batteries at the
same time, but requires separate LiPo cell balancers, so
for each LiPo battery you wish to charge simultaneously
(up to 4), one Great Planes Equinox
(GPMM3160) will be required. The Equinox comes with
2S and 3S charge adapters, so these will be suitable for
the batteries recommended for your Rifl e. Finally, the
PolyCharge4 does not have AC capability, so if wall-
charging from home is a priority a separate A/C 12-Volt
power source must also be purchased. A suitable power
supply then for the PolyCharge4 is the Great Planes 12V
12A DC power supply (GPMP0901).
Adhesives and Building Supplies
Other than common hobby tools this is the list of adhesives
and building supplies that are required to fi nish the Rifl e.
2
3
4
™
AC/DC Charger
™
LiPo Cell Balancer
KIT CONTENTS
1
5
❍ 1/2 oz. [15g] Thin Pro
❍ CA applicator tips (HCAR3780)
❍ 2 oz. [59mL] spray CA activator (GPMR6035)
❍ Threadlocker thread locking cement (GPMR6060)
❍ Stick-on segmented lead weights (GPMQ4485)
❍ 1/16" [1.6mm] drill
Optional Supplies
❍ Du-Bro
®
double-sided tape (DUBQ3551—for
mounting ESC, receiver)
❍ Shoe Goo
™
(DTXC2460—for securing servo wires)
❍ Great Planes Velcro
batteries)
Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of
acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or
missing parts, use the part names exactly as they are written
in the Kit Contents list.
Great Planes
Product Support
3002 N Apollo Drive, Suite 1
Champaign, IL 61822
E-mail: [email protected]
8
6
9
7
4
™
CA (GPMR6001)
®
(GPMQ4480—for additional
KIT INSPECTION
Ph: (217) 398-8970, ext. 5
Fax: (217) 398-7721
1. Fuselage
2. Wing
3. Elevator pushrod
4. Horizontal stabilizer
5. Spinner
(cone, back plate, shaft,
washer, nut, spare shaft)
6. Balancing stand
7. Adhesive-back
hook & loop material
8. Elevator servo mount
10
9. Landing skids
10. Aileron pushrods
11
11. Antenna guide tube