- ページ 4

おもちゃ GREAT PLANES Electrifly RifleのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES Electrifly Rifle 16 ページ。

ページを印刷する

ADDITIONAL ITEMS REQUIRED

Battery Charger

•

A LiPo-capable battery charger and a power source for

the charger is required. One recommended charger is

the Great Planes ElectriFly TritonEQ

(GPMM3155). The TritonEQ can be powered either by

an AC or DC power source and features a built-in LiPo

cell balancer.

•

Another suitable LiPo battery charger is the Great Planes

PolyCharge4

™

DC LiPo charger (GPMM3015). The

PolyCharge4 can charge up to four LiPo batteries at the

same time, but requires separate LiPo cell balancers, so

for each LiPo battery you wish to charge simultaneously

(up to 4), one Great Planes Equinox

(GPMM3160) will be required. The Equinox comes with

2S and 3S charge adapters, so these will be suitable for

the batteries recommended for your Riﬂ e. Finally, the

PolyCharge4 does not have AC capability, so if wall-

charging from home is a priority a separate A/C 12-Volt

power source must also be purchased. A suitable power

supply then for the PolyCharge4 is the Great Planes 12V

12A DC power supply (GPMP0901).

Adhesives and Building Supplies

Other than common hobby tools this is the list of adhesives

and building supplies that are required to ﬁ nish the Riﬂ e.

™

AC/DC Charger

™

LiPo Cell Balancer

KIT CONTENTS

❍ 1/2 oz. [15g] Thin Pro

❍ CA applicator tips (HCAR3780)

❍ 2 oz. [59mL] spray CA activator (GPMR6035)

❍ Threadlocker thread locking cement (GPMR6060)

❍ Stick-on segmented lead weights (GPMQ4485)

❍ 1/16" [1.6mm] drill

Optional Supplies

❍ Du-Bro

double-sided tape (DUBQ3551—for

mounting ESC, receiver)

❍ Shoe Goo

™

(DTXC2460—for securing servo wires)

❍ Great Planes Velcro

batteries)

Before starting to build, take an inventory of this kit to make

sure it is complete, and inspect the parts to make sure they

are of acceptable quality. If any parts are missing or are not of

acceptable quality, or if you need assistance with assembly,

contact Product Support. When reporting defective or

missing parts, use the part names exactly as they are written

in the Kit Contents list.

Great Planes

Product Support

3002 N Apollo Drive, Suite 1

Champaign, IL 61822

E-mail: [email protected]

™

CA (GPMR6001)

(GPMQ4480—for additional

KIT INSPECTION

Ph: (217) 398-8970, ext. 5

Fax: (217) 398-7721

1. Fuselage

2. Wing

3. Elevator pushrod

4. Horizontal stabilizer

5. Spinner

(cone, back plate, shaft,

washer, nut, spare shaft)

6. Balancing stand

7. Adhesive-back

hook & loop material

8. Elevator servo mount

9. Landing skids

10. Aileron pushrods

11. Antenna guide tube