GREAT PLANES Spirit Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} GREAT PLANES Spirit. GREAT PLANES Spirit 16 pages. 2-meter sailpane
Imprimer la page
airplane, please call us at (217) 398-8970. You can also
check our web site at www.greatplanes.com for the
latest Spirit ARF updates, or e-mail your questions to:
If you are calling for replacement parts, please
reference the part numbers and the kit identification
number (stamped on the end of the carton) and have
them ready when calling.
PREPARATIONS
Required Accessories
Items in parentheses such as (GPMQ4243) are suggested
part numbers recognized by distributors and hobby shops
and are listed for your ordering convenience. GPM is the
Great Planes brand, TOP is the Top Flite
is the Hobbico
brand.
®
❏
Minimum Two-Channel Radio With Two Servos
❏
Square Receiver Battery Pack (500 mAh)
Building Supplies & Tools
These are the building tools that are required. We
recommend Great Planes Pro
❏
2 oz. Pro CA (Thin, GPMR6003)
❏
2 oz. Pro CA+ (Medium, GPMR6009)
❏
6-Minute Pro Epoxy (GPMR6045)
❏
Epoxy Brushes (GPMR8060)
❏
Pro Thread Locking Compound (GPMR6060)
❏
Plastic Wrap or Waxed Paper
❏
Isopropyl Alcohol (70%)
❏
Mixing Sticks (GPMR8055)
❏
Round Toothpicks
❏
Hobby Knife, #11 Blades
❏
Small Hobby Clamps
❏
Clothes Pins
❏
String
❏
Builders Triangle Set (HCAR0480)
Inch Scale
0"
1"
0
10
20
30
Metric Scale
brand, and HCA
®
CA and Epoxy glue.
™
2"
3"
40
50
60
70
❏
Masking Tape (TOPR8018)
❏
1/2"
(HCAQ1050)
❏
Paper Towels
❏
Felt-Tip Marker
❏
Wire Cutter
❏
Drill Bits: 5/64" [2mm], 3/32" [2.5mm]
Optional Supplies & Tools
❏
CA Applicator Tips (HCAR3780)
❏
CA Debonder (GPMR6039)
❏
Sealing Iron (TOPR2100)
❏
Single-Edge Razor Blades (HCAR0312)
❏
Curved Tip Canopy Scissors For Trimming Plastic
Parts (HCAR0667)
Remove the fuselage, wing panels, rudder assembly and
stabilizer assembly from their bags. Inspect all items closely
to check for any damage. If any damage is found, contact
the place where your Spirit ARF was purchased, or Hobby
Services, to obtain a replacement for your damaged items.
If any of the control surfaces are attached, simply pull them
apart and store the hinges in a safe place until it is time to
re-attach them.
Your Spirit ARF is covered using Top Flite MonoKote
covering. Eliminate any wrinkles you find in the covering by
shrinking them away with a heat gun. Then, apply pressure
to the area with a covering iron and a hot sock. This will
securely bond the covering to the wood so the wrinkles will
be less likely to reappear in the future.
Several times during construction we refer to the "top" or
"bottom" of the model or a part of the model. It is understood
that the "top" or "bottom" of the model is as it would be when
the airplane is right side up and will be referred to as the
"top" even if the model is being worked on upside-down.
4"
80
90
100 110 120 130 140 150 160 170 180
3
[13mm]
Latex
Foam
General Inspection
Building Notes
5"
6"
Rubber
Padding
®
7"