GREAT PLANES Spirit Kullanım Kılavuzu - Sayfa 3

Oyuncak GREAT PLANES Spirit için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GREAT PLANES Spirit 16 sayfaları. 2-meter sailpane

Sayfayı Yazdır

airplane, please call us at (217) 398-8970. You can also

check our web site at www.greatplanes.com for the

latest Spirit ARF updates, or e-mail your questions to:

[email protected].

If you are calling for replacement parts, please

reference the part numbers and the kit identification

number (stamped on the end of the carton) and have

them ready when calling.

PREPARATIONS

Required Accessories

Items in parentheses such as (GPMQ4243) are suggested

part numbers recognized by distributors and hobby shops

and are listed for your ordering convenience. GPM is the

Great Planes brand, TOP is the Top Flite

is the Hobbico

brand.

❏

Minimum Two-Channel Radio With Two Servos

❏

Square Receiver Battery Pack (500 mAh)

Building Supplies & Tools

These are the building tools that are required. We

recommend Great Planes Pro

❏

2 oz. Pro CA (Thin, GPMR6003)

❏

2 oz. Pro CA+ (Medium, GPMR6009)

❏

6-Minute Pro Epoxy (GPMR6045)

❏

Epoxy Brushes (GPMR8060)

❏

Pro Thread Locking Compound (GPMR6060)

❏

Plastic Wrap or Waxed Paper

❏

Isopropyl Alcohol (70%)

❏

Mixing Sticks (GPMR8055)

❏

Round Toothpicks

❏

Hobby Knife, #11 Blades

❏

Small Hobby Clamps

❏

Clothes Pins

❏

String

❏

Builders Triangle Set (HCAR0480)

Inch Scale

Metric Scale

brand, and HCA

CA and Epoxy glue.

™

❏

Masking Tape (TOPR8018)

❏

1/2"

(HCAQ1050)

❏

Paper Towels

❏

Felt-Tip Marker

❏

Wire Cutter

❏

Drill Bits: 5/64" [2mm], 3/32" [2.5mm]

Optional Supplies & Tools

❏

CA Applicator Tips (HCAR3780)

❏

CA Debonder (GPMR6039)

❏

Sealing Iron (TOPR2100)

❏

Single-Edge Razor Blades (HCAR0312)

❏

Curved Tip Canopy Scissors For Trimming Plastic

Parts (HCAR0667)

Remove the fuselage, wing panels, rudder assembly and

stabilizer assembly from their bags. Inspect all items closely

to check for any damage. If any damage is found, contact

the place where your Spirit ARF was purchased, or Hobby

Services, to obtain a replacement for your damaged items.

If any of the control surfaces are attached, simply pull them

apart and store the hinges in a safe place until it is time to

re-attach them.

Your Spirit ARF is covered using Top Flite MonoKote

covering. Eliminate any wrinkles you find in the covering by

shrinking them away with a heat gun. Then, apply pressure

to the area with a covering iron and a hot sock. This will

securely bond the covering to the wood so the wrinkles will

be less likely to reappear in the future.

Several times during construction we refer to the "top" or

"bottom" of the model or a part of the model. It is understood

that the "top" or "bottom" of the model is as it would be when

the airplane is right side up and will be referred to as the

"top" even if the model is being worked on upside-down.

100 110 120 130 140 150 160 170 180

[13mm]

Latex

Foam

General Inspection

Building Notes

Rubber

Padding