Dynacord DSP 260 Spécifications - Page 3

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Dynacord DSP 260. Dynacord DSP 260 4 pages. Digital sound system processor
Également pour Dynacord DSP 260 : Spécifications (1 pages)

Imprimer la page
Dynacord DSP 260 Spécifications

Technical Specifications

Property
Mains Voltage
Power Consumption
Analog Audio Inputs
Digital Audio Inputs
Digital Audio Format
Nominal Input Voltage
Maximum Input Voltage (with -6dB PAD engaged)
Input Impedance
Common Mode Rejection
A/D Conversion
Analog Audio Outputs
Nominal Output Voltage
Maximum Output Voltage
Output Impedance
D/A Conversion
Frequency Response
THD+N
Dynamic Range
USB
9-pin DSUB
Sample Rate
Data Format
Internal Processing
Signal Processing
Operating Temperature Range
Dimensions (WxHxD)
Weight (Net)
Weight (Gross)
Bosch Sicherheitssysteme GmbH • Sachsenring 60 • 94315 Straubing • Telefon (09421) 706-0 • Telefax (09421) 706-265
Subject to change without prior notice. Printed in Germany
100 to 240 V AC, 50 to 60 Hz
2 x XLR IN, electronically balanced
2 x XLR THRU OUT, electronically balanced
1 x XLR AES/EBU IN
AES3, 32 kHz to 192 kHz sample rate
1.23 V / +4 dBu
17.3 V / +27 dBu
10 k
-80 dB @ 1 kHz (typical)
24-Bit Sigma-Delta
6 x XLR OUT, electronically balanced
1.23 V / +4 dBu
8.7 V / +21 dBu
24-Bit Sigma-Delta
10 Hz to 22 kHz (+/-0.5 dB)
< 0.01 % (band limited 22 Hz to 22 kHz)
111 dB unweighted (band limited 22 Hz to 22 kHz)
USB Type B on front panel (PC Interface)
Software Configurable for Preset Recall or Master/Slave
48 kHz
24-Bit
32-Bit Floating Point
Parametric EQs, 31 band Graphic EQs, Delays, Routing, X-Over, Limiter, Level, Polarity
0 °C to 40 °C
19 x 14 x 1.72 inch (483 x 357 x 43.6 mm)
4.6 kg
5.9 kg
Vs 01
Value
25 W
50 
21-Jan-11
F01U100852