Dynacord DSP 260 사양 - 페이지 3
{카테고리_이름} Dynacord DSP 260에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynacord DSP 260 4 페이지. Digital sound system processor
Dynacord DSP 260에 대해서도 마찬가지입니다: 사양 (1 페이지)
페이지 인쇄
Technical Specifications
Property
Mains Voltage
Power Consumption
Analog Audio Inputs
Digital Audio Inputs
Digital Audio Format
Nominal Input Voltage
Maximum Input Voltage (with -6dB PAD engaged)
Input Impedance
Common Mode Rejection
A/D Conversion
Analog Audio Outputs
Nominal Output Voltage
Maximum Output Voltage
Output Impedance
D/A Conversion
Frequency Response
THD+N
Dynamic Range
USB
9-pin DSUB
Sample Rate
Data Format
Internal Processing
Signal Processing
Operating Temperature Range
Dimensions (WxHxD)
Weight (Net)
Weight (Gross)
Bosch Sicherheitssysteme GmbH • Sachsenring 60 • 94315 Straubing • Telefon (09421) 706-0 • Telefax (09421) 706-265
Subject to change without prior notice. Printed in Germany
100 to 240 V AC, 50 to 60 Hz
2 x XLR IN, electronically balanced
2 x XLR THRU OUT, electronically balanced
1 x XLR AES/EBU IN
AES3, 32 kHz to 192 kHz sample rate
1.23 V / +4 dBu
17.3 V / +27 dBu
10 k
-80 dB @ 1 kHz (typical)
24-Bit Sigma-Delta
6 x XLR OUT, electronically balanced
1.23 V / +4 dBu
8.7 V / +21 dBu
24-Bit Sigma-Delta
10 Hz to 22 kHz (+/-0.5 dB)
< 0.01 % (band limited 22 Hz to 22 kHz)
111 dB unweighted (band limited 22 Hz to 22 kHz)
USB Type B on front panel (PC Interface)
Software Configurable for Preset Recall or Master/Slave
48 kHz
24-Bit
32-Bit Floating Point
Parametric EQs, 31 band Graphic EQs, Delays, Routing, X-Over, Limiter, Level, Polarity
0 °C to 40 °C
19 x 14 x 1.72 inch (483 x 357 x 43.6 mm)
4.6 kg
5.9 kg
Vs 01
Value
25 W
50
21-Jan-11
F01U100852