AFG 7.1AT Manuel d'assemblage rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage rapide pour {nom_de_la_catégorie} AFG 7.1AT. AFG 7.1AT 5 pages.
ASSEMBLY STEP 4
HARDWARE fOR STEP 4 :
BOLT (F)
12 mm
Qty: 4
HANDLEBARS
CONSOLE CABLES
CENTER BAR
ASSEMBLY STEP 5
HARDWARE fOR STEP 5 :
BOLT (I)
15 mm
Qty: 6
SPRING WASHER (G)
ARC WASHER (H)
6.2 mm
6.2 mm
Qty: 4
Qty: 4
ARC WASHERS (H)
SPRING WASHERS (G)
BOLTS (F)
FLAT WASHER (E)
SPRING WASHER (B)
8.2 mm
8.2 mm
Qty: 6
Qty: 6
CONSOLE
CONSOLE CABLES
HANDLEBARS
BOLTS (I)
SPRING WASHERS (B)
FLAT WASHERS (E)
A
Open hardware for step 4.
B
Connect the console cables, discard the
twist tie and slide the console cables into the
center bar.
Attach handlebars to center bar using 4
C
bolts (e), 4 spring washers (f) and 4 arc
washers (g).
NOTE: Do not tighten bolts until step 5 is complete.
Do not pinch wires while assembling the handlebars.
Attach console cables from handlebars
A
to console cables from console. Gently
tuck excess cable into console before sliding the
handlebars onto console.
B
Attach handlebars to console using 6
bolts (i), 6 spring washers (b) and 6 flat
washers (e).
Completely tighten all bolts from step 4.
C
NOTE: Do not pinch wires while attaching
the handlebars.
IMPORTANT
This treadmill has a pre-waxed belt and
should never be lubricated. Waxing
the belt can cause damage that is not
covered by the warranty.
YOU ARE FINISHED!
4