Automated Logic UNI/16 Instructions techniques - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions techniques pour {nom_de_la_catégorie} Automated Logic UNI/16. Automated Logic UNI/16 8 pages.

Imprimer la page

1. Using the Uni/16

Using the UNI/1 6

The UNI/16 provides the communications

link between the CMnet and up to 16 U-Line

modules.

The UNI/16 uses the U1M module driver. See

the U1M Module Driver document at

http://www.automatedlogic.com, or the

SupportPlus CD for more information.

Ethernet, TCP/IP

MX-Line

CMnet (ARC156)

UNI/16

Figure 1. System Architecture

CAUTION Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user's authority to operate equipment.

NOTE This equipment has been tested and

found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case the

Revised 4/27/00 • UNI/16

LGRM-E

MX-Line

S-Line

U-Line: 9600 bps or 38400 bps

TNPB

U-Line Modules

user will be required to correct the

interference at his own expense.

Specifications

Power 24VAC ± 10%, 50-60Hz, 0.3A (7.2VA)

power consumption (single Class 2

source only, 100VA or less).

Communication One EIA-232 port for

diagnostics (9600 bps or 38.4 kbps), two

EIA-485 ports for Unet communication

(9600 bps or 38.4 kbps), one EIA-485 port

for CMnet communication (9600 bps,

38.4 kbps, or 156 kbps).

Environmental Operating Range 0° to

130°F (-17.8° to 54.4°C); 10 to 90%

relative humidity, non-condensing.

Status Indication Visual (LED) status of

CMnet and Unet communication,

running, errors, and power.

Memory 1MB Flash memory and 1MB non-

volatile battery-backed RAM.

Protection Voltage, current, and ESD

protection on incoming power and

CMnet.

Battery Lithium 3V Primary Battery, Type

BR2325 (not replaceable). Provides a

minimum of 10,000 hours of data

retention during power outages.

Listed by UL 916 (PAZX), cUL C22.2 No.

205-M1983 (PAZX7), FCC Part 15 -

Subpart B - Class A.

Mounting

Screw the UNI/16 into an enclosed panel

using the mounting holes provided on the

cover plate. Be sure to leave about 2 inches (5

centimeters) on each side for wiring.

Power Wiring

CAUTION The UNI/16 module is a Class 2

device (less than 30VAC, 100VA maximum).

Take appropriate isolation measures when

mounting the UNI/16 module in a control

panel where non-Class 2 devices (for

example, 120VAC) or wiring are present.