DaytonAudio APA102 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DaytonAudio APA102. DaytonAudio APA102 5 pages. Class d stereo amplifier 60 wpc
Imprimer la page
Thank you for purchasing the Dayton Audio APA102 Class D Stereo Amplifier. This amplifier features bridged outputs that
can provide continuous 160W power into an 8 ohm load. Class D amplifiers offer the audio fidelity of a Class AB amplifier
while providing greater power efficiency.
FEATURES:
• Class D Amplification
• MAIN / INTERRUPT priority input switching
• MAIN auxiliary output
• Speaker A/B switching
• Front panel Balance and Volume controls
• Signal sensing "Power On" and Trigger mode
• Rear mounted treble and bass controls
• Short circuit and thermal protection
2.15"
(55mm)
7.65"
(194mm)
SPECIFICATIONS
Power Output: 2 x 60W per channel with <1% THD+N 8-ohm load
2 x 75W per channel with <1% THD+N 4-ohm load
1 x 160W @ 1 kHz with <1% THD+N 8-ohm load (minimum)
Frequency Response: 10 – 30,000 Hz
Signal to Noise Ratio: 100dB
Channel Separation: 65dB
Input Sensitivity: 700mV
Bass/Treble Control: +/-12dB @ 100 Hz and 10 kHz
AC Power Consumption: 200W maximum
Dimensions: 2.15" H x 16.9" W x 7.65" D
Weight: 4.7lbs
16.9" (430mm)
3