DaytonAudio APA102 Kullanıcı Kılavuzu - Sayfa 3

Amplifikatör DaytonAudio APA102 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DaytonAudio APA102 5 sayfaları. Class d stereo amplifier 60 wpc

Sayfayı Yazdır

Thank you for purchasing the Dayton Audio APA102 Class D Stereo Amplifier. This amplifier features bridged outputs that

can provide continuous 160W power into an 8 ohm load. Class D amplifiers offer the audio fidelity of a Class AB amplifier

while providing greater power efficiency.

FEATURES:

• Class D Amplification

• MAIN / INTERRUPT priority input switching

• MAIN auxiliary output

• Speaker A/B switching

• Front panel Balance and Volume controls

• Signal sensing "Power On" and Trigger mode

• Rear mounted treble and bass controls

• Short circuit and thermal protection

2.15"

(55mm)

7.65"

(194mm)

SPECIFICATIONS

Power Output: 2 x 60W per channel with <1% THD+N 8-ohm load

2 x 75W per channel with <1% THD+N 4-ohm load

1 x 160W @ 1 kHz with <1% THD+N 8-ohm load (minimum)

Frequency Response: 10 – 30,000 Hz

Signal to Noise Ratio: 100dB

Channel Separation: 65dB

Input Sensitivity: 700mV

Bass/Treble Control: +/-12dB @ 100 Hz and 10 kHz

AC Power Consumption: 200W maximum

Dimensions: 2.15" H x 16.9" W x 7.65" D

Weight: 4.7lbs

16.9" (430mm)